Loading...
DN 50-> DN 600 (Special diameters on request)
PRESSURE From 6 to 40 Bar
TEMPERATURE -200° ÷ 800°C. Possible variations according to terminals

For a temperature range 50° ÷ 550°C performances (movements, working pressure, n° of cycles) must be reduced by applying the relevant coefficients (See document N205 Derating factors”).
For a temperature range higher than 550°C, please contact our Technical Department.

GIMBAL EXPANSION JOINTS WITH WELD ENDS

DESCRIPTION

The angular gimbal expansion joints is a type of expansion joints designed to allow angular rotation of the terminals on all work planes. This type of movement is possible thanks to the use of two hinges positioned on a common floating ring for both terminals. Cardan angle expansion joints are able to contain the bottom thrust generated by the internal pressure without the need for additional tie-rods.

UTILITY

Correction of static offsets and compensation for thermal expansion and movements.

Superheated water lines, steam, diathermic oil, steam turbines.

CERTIFICATIONS

PED-certified in accordance with the mandatory regulation 2014/68/EU.

A type approval (TYPE APPROVAL) for marine applications can be applied if requested by the customer.

Ask for a quote

Fill out the contact form for any doubt or information

    By submitting I accept the privacy policy and the processing of my personal data.

    * the fields are required