Loading...
DN 50-> DN 600. (Special diameters on request)
PRESSURE From 6 to 40 Bar
TEMPERATURE -200° ÷ 800°C. Possible variations according to terminals

For a temperature range 50° ÷ 550°C performances (movements, working pressure, n° of cycles) must be reduced by applying the relevant coefficients (See document N205 Derating factors”).
For a temperature range higher than 550°C, please contact our Technical Department.

HINGED EXPANSION JOINTS WITH WELD ENDS

DESCRIPTION

An hinged expansion joints contains a bellows and is designed to allow angular rotation in a single plane by means of a pair of pins passing through plates attached to the ends of the expansion joint. The hinged expansion joints must be used in sets of 2 or 3 in order to function properly.

UTILITY

Correction of static offsets and compensation for thermal expansion and movements. Superheated water lines, steam, diathermic oil, steam turbines.

CERTIFICATIONS

PED-certified in accordance with the mandatory regulation 2014/68/EU.

A type approval (TYPE APPROVAL) for marine applications can be applied if requested by the customer.

Ask for a quote

Fill out the contact form for any doubt or information

    By submitting I accept the privacy policy and the processing of my personal data.

    * the fields are required